- 20 -3.2 Status Display LEDThe display LED is located on the front panel and shows thescanner status.Steady illumination:Lights when power is supplied (READYstatus).Blinking (about once every 1.5 seconds):Blinks slowly during operation (BUSY status).Also blinks when the power is switched onand during initialization.Fast blinking (about 5 times a second):Blinks fast when an error occurs either in thescanner or in communication (ERROR status).Note: The blinking cycle may sometimes be irregular, but this doesnot necessarily signify a product malfunction.Status DisplayLED3.3 Strip Film Holder FH-2This strip film holder can be used with a strip of film containingup to six images.Film holder latchAdaptor snapApertureAdaptor coverCover latchFilm holder latch Upper holderLower holderLower holderconcave section(Film sits here)