Nikon 35mm User Manual
Also see for AF-S DX NIKKOR 35mm f/1.8G: User manualSpecificationsUser manualUser manualUser manual
                                                    | |
Contents
| 
- 23 -4.3 Connecting the SCSI CableBefore connecting the SCSI cable, confirm that all SCSI devices,including the computer system, have been turned off.Connect the unit to the computer using the SCSI cable. Afterattaching the connector, be sure to lock it in place. You canconnect the SCSI cable to either of the SCSI connectors on therear panel of the unit.55If the unit is the only connected SCSI device, or if the unit isconnected at the end of the SCSI chain, attach a terminator(terminal resistance) to the other SCSI connector. At this point,remove the terminator of the other SCSI device that has beenplaced between them. The terminator is not needed when theunit is connected between other SCSI devices.5Connect SCSI devices in a chain, and attach terminators to bothends of the chain. Since the terminator is built into the hostcomputer in most cases, the host computer should be at theend of the SCSI chain. The operation manuals of somenotebook computers require a terminator to be attachedoutside the computer; please refer to the operation manual forthe computer to which the unit is connected.Note: The SCSI cable used for SCSI connection should be of high-impedance type.Terminator |
Related manuals for Nikon AF-S DX NIKKOR 35mm f/1.8G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine