19EnThe Optional RT-1 Tripod Collar RingLoosen the tripod collar ring attachment knob to rotate the camera to thedesired position and orient the display horizontally or vertically. Note thatyour hand may come into contact with the tripod if you rotate the camerawhile holding it by the handgrip. Depending on how the camera ortripod is attached, camera shake may be reduced by attaching the tripodto the camera tripod mount.WARNINGFully tighten the tripod collar ring attachment knob when attachingtripod collar ring. Failure to observe this precaution could result in thetripod collar ring becoming detached from the lens, causing injury.AAttaching the Tripod Collar Ring4567z Loosen the tripod collar ring attachment knob(q).x Open the ring.Pull the attachment knob toward you (w) andopen the ring (e).c Place the lens in the ring (r).v Close the ring.Pull the attachment knob toward you (t) and closethe ring (y). Do not use excessive force, as yourhand could be caught in the ring.b Tighten the attachment knob (u).Positioning the CameraLoosen the attachment knob (q), adjust the positionindices to the desired vertical or horizontal orientation(w), and then tighten the attachment knob (e).Removing the Tripod Collar Ring4 z Loosen the attachment knob (q).x Remove the ring.Pulling the attachment knob toward you (w), open(e) and remove the lens (r).N