56More on PlaybackViewing Pictures on TVThe EG-CP14 audio / video (A / V) cable included with the camera can be usedto connect the camera to a television or video-cassette recorder (VCR).Choosing a Video ModeThe Video mode item in the setup menu offers a choice of NTSC and PAL( 99). Be sure that the mode selected matches the standard used in thevideo device.1 Turn the camera offTurn the camera off before connecting or disconnecting the A / V cable.2 Connect the A / V cableOpen the interface connector cov-er as shown at right and insert theblack plug into the camera’s inter-face connector. Insert the yellowplug into the video-in jack on thetelevision or VCR. Connect thewhite plug to the audio-in jack.PALIf the camera is used to record movies with PAL selected for Video mode and thecamera connected to a video device, video output will be suspended and the cameramonitor will turn on.3 Tune the television to the video channelIf in doubt, consult the documentation for your television or VCR.4 Turn the camera onPress the button for about a second to turn the camera on. The cameramonitor will remain off and the television will show the image normallyshown in the monitor.
