~ Starting Nikon Transfer 2If there are a large number of images on the memory card, it may take some time for NikonTransfer 2 to start.~ Powering the Camera During Image TransferWhen connecting the camera to a computer, use batteries with a sufficient amount of chargeremaining to prevent the camera from turning off unexpectedly.~ Transferring Images Using a Commercially-available Card Reader or aComputer's Card SlotThe following methods can also be used to transfer images saved on a memory card to acomputer.• Connect a commercially-available card reader to the computer, and then insert thememory card.• Insert the memory card directly into the computer's card slot.-------- --- _ _----------_._----_ .. -.. _---------_. __._.. _ --I1.4 Confirm that the correct source is selected.Confirm that the camera or removable disk appears as a device button in the "Source"panel of the Nikon Transfer 2 "Options" area.Device button1.5 Click Start Transfer.At default settings, all the images on the memory card will be copied to the computer.Click Start Transfer~ Using ViewNX 2
