StorageTurn tile camera off when not in use. Check that tile power-on lamp is off beforeputting tile camera away. Remove tile battery if tile camera will not be used for anextended period. Do not store tile camera with naphtha or camphor moth balls, orin any of the following locations:• Next to equipment that produces strong electromagnetic fields, such astelevisions or radios• Exposed to temperatures below-10 °C (14 °F) or above 50 °C (122 °F)• Poorly ventilated or sub]ect to humidities of over 60%To prevent mold or mildew, take tile camera out of storage at least once a month.Turn tile camera on and release tile shutter a few times before putting tile cameraaway again.212Notes on the Monitor• The monitor may contain a few pixels that are always lit or that do not light. This is a characteristiccommon to all TFT LCDdisplays, and does not indicate a malfunction. Images recorded using theproduct will not be affected.• images on the monitor may be difficult to see under bright lighting.• The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact yourNikon authorized service representative.