29The Basics of Shooting and Playback5 Set the date and time, and pressthe k button.• Select a field: Press JK (changes betweenD, M, Y, h, and m).• Edit the date and time: Press HI.Date and time can also be changed byrotating the multi selector or command dial.• Confirm the setting: Select the m field andpress the k button.6 Select Yes and press the kbutton.• When settings are finished, the lens extendsand the camera switches to shooting mode.C Changing the Language Setting and the Date and Time Setting• You can change these settings using the Language and Time zone and datesettings in the z setup menu (A95).• You can enable or disable daylight saving time in the z setup menu by selectingTime zone and date followed by Time zone. Enabling day light saving timemoves the clock forward one hour, and disabling it moves the clock back one hour.C The Clock Battery• The camera’s clock is powered by a built-in backup battery.The backup battery charges when the main battery is inserted into the camera orwhen the camera is connected to an optional AC adapter, and it can run the clockfor several days after about 10 hours of charging.• If the camera’s backup battery becomes exhausted, the date and time settingscreen is displayed when the camera is turned on. Set the date and time again. Seestep 2 of “Setting the Display Language, Date, and Time” (A28) for moreinformation.C Imprinting the Shooting Date on Printed Images• You can permanently imprint the shooting date on images as they are captured bysetting Print date in the setup menu.• If you want the shooting date to be printed without using the Print date setting,print using the ViewNX 2 software (A102).15201415 05 10EditmhYMDDate and time15:1015/05/2014NoYesOK?Date and time
