44Shooting Featuresy M f Party/indoor• To avoid the effects of camera shake, hold the camera steady. Set Vibrationreduction (A95) to Off in the setup menu when using a tripod to stabilize thecamera during shooting.y M k Close-upFrom the screen displayed after k Close-up is selected, select Noise reductionburst or Single shot.• Noise reduction burst: This enables you to shoot a sharp image with aminimum of noise.- Press the shutter-release button all the way to capture a series of imageswhich are combined into a single image and saved.- Once the shutter-release button is pressed all the way, hold the camera stilluntil a still image is displayed. After taking an image, do not turn the cameraoff before the monitor switches to the shooting screen.- If the subject moves or there is a significant camera shake during continuousshooting, the image may be distorted, overlapped, or blurred.- The angle of view (i.e., the area visible in the frame) seen in the saved image isnarrower than that seen in the monitor at the time of shooting.• Single shot (default setting): Saves images with emphasized outlines andcontrast.- One image is captured when the shutter-release button is pressed all the way.• The focus mode (A65) setting is changed to D (macro close-up) and thecamera automatically zooms to the closest position at which it can focus.• You can move the focus area. Press the k button, use the multi selectorHIJK or rotate it to move the focus area, and press the k button to applythe setting.
