Observe caution whenhandling the batteryThe battery may leak or explode ifinlproperly handled. Observe thefollowing precautions when handlingthe battery for use in this product:• Before replacing the battery, turnthe product off. If you are using theCharging AC AdapterJAC adapter,be sure it is unplugged.• Only use a Rechargeable Li ion BatteryEN EL10(supplied). Charge thebattery inserted into the canlera byconnecting the Charging A¢ AdapterEH 68P/EH 68P (AR)(supplied).• When inserting the battery, do notattenlpt to insert it upside down orbackwards.• Do not short or disassemble thebattery or attempt to remove orbreak the battery insulation orcasing.• Do not expose the battery to flameor to excessive heat.• Do not immerse in or expose towater.• Return the battery to the batterycase for transportation. Do nottransport or store with metal objectssuch as necklaces or hairpins.• The battery is prone to leakagewhen fully discharged. To avoiddamage to the product, be sure toremove the battery when no chargererT/aJns.• Discontinue useimmediatelyshouldyou notice any change in thebattery, such as discoloration ordeformation.• If liquid from the damaged batterycomes in contact with clothing orskin, rinse immediately with plentyof water.Z_ Observe the followingprecautions when handlingthe Charging AC Adapter• Keep dry. Failure to observe thisprecaution could result in fire orelectric shock.• Dust on or near the nletal parts ofthe plug should be removed with adry cloth. Continued use couldresult in fire.• Do not handle the plug or go nearthe Charging AC Adapter duringlightning storms. Failure to observethis precaution could result inelectric shock.• Do not damage, nlodify, forcibly tugor bend the USBcable, place itunder heavy objects, or expose it toheat or flahies. Should tile insulationbe danlaged and tile wires beconleexposed, take it to a Nikonauthorized service representative forinspection. Failure to observe theseprecautions could result in fire orelectric shock.• Do not handle tile plug or ChargingAC Adapter with wet hands. Failureto observe this precaution couldresult in electric shock.• Do not use with travel converters oradapters designed to convert fronlone voltage to another or with DCto AC inverters. Failure to observethis precaution could danlage tileproduct or cause overheating or fire.iii