148Technical NotesError MessagesThe following table lists the error messages and other warnings displayed in themonitor, as well as the solutions for dealing with them.Display Problem Solution AO(blinks) Clock not set. Set clock. 125B Battery is running low. Prepare to charge or change battery. 14, 16NBattery exhausted. Battery exhausted. Charge or replace battery. 14, 16PBattery temperature highBattery temperature ishigh.Turn off camera, and allow battery tocool down before resuming use.After five seconds, this message willdisappear, the monitor will turn off,and the power-on lamp will blinkrapidly. After the lamp blinks for threeminutes, the camera will turn offautomatically, but you can also pressthe power switch to turn it offmanually.17Q(blinks red) Camera cannot focus. • Refocus.• Use focus lock.26, 27111PPlease wait for thecamera to finishrecording.Camera cannotperform otheroperations untilrecording is complete.Wait until message clears fromdisplay automatically whenrecording is complete.27, 77NMemory card is writeprotected.Write-protect switch isin “lock” position.Slide the write-protect switch to“write” position. 21PThis card cannot be used. Error accessingmemory card.• Use an approved card.• Check that connectors are clean.• Confirm that memory card iscorrectly inserted.1422020PThis card cannot be read.PCard is not formatted.Format card?NoYesMemory card has notbeen formatted for usein this camera.Choose Yes and press the k buttonto format memory card. 21NOut of memory. Memory card is full.• Choose smaller image mode.• Delete pictures or sound files.• Replace memory card.• Remove memory card and useinternal memory.10028, 80,84, 1182020
