Using Target Finding AFWhen AF area mode (_68) in I_ (auto) mode is set to Target finding AF, tile camerafocuses in the manner described below when you press the shutteerelease button halfway.• If the camera detects the main subject, it focuses on thatsubject. When the subject is in focus, the focus areas (up tothree areas) that match up with the size of the subject lightin green.When human faces are detected, the camera automaticallysets focus priority on one of them.FocusareasIf the camera does not detect the main subject, itautomatically selects one or more of the nine focus areascontaining the subject closest to the camera. When thesubject is in focus, the focus areas that are in focus (up tonine areas) light in green.Focusareas_1_ Notes About Target Finding AF• Depending on shooting conditions, the subject that the camera determines to be the mainsubject may vary,• When White balance is set to any setting other than Auto, the camera does not detect the mainsubject.• The camera may not detect the main subject appropriately in the following situations:When the image shown in the monitor is very dark or brightWhen the main subject lacks clearly defined colorsWhen the shot is framed so that the main subject is at the edge of the monitorWhen the main subject is composed of a repeating patternE75