Reference SectionE80Refer to the table below if an error message is displayed.Error MessagesDisplay Cause/Solution ABattery temperatureis elevated. Thecamera will turn off. The camera turns off automatically. Wait untilthe camera or battery temperature has cooledbefore resuming use.–The camera will turnoff to preventoverheating.Memory card is writeprotected.The write-protect switch is in the “lock” position.Slide the write-protect switch to the “write”position.–This card cannot beused.An error occurred while accessing the memorycard.• Use an approved card.• Check that the terminals are clean.• Confirm that the memory card is correctlyinserted.14, F21This card cannot beread.Card is notformatted. Formatcard?The memory card has not been formatted foruse in the camera.Formatting deletes all data saved on thememory card. If you need to keep copies of anyimages, make sure to select No and save thecopies to a computer or other medium beforeformatting the memory card. Select Yes andpress the k button to format the memory card.F5Not available if Eye-Ficard is locked.The write-protect switch of the Eye-Fi card is inthe “lock” position. –An error occurred while accessing the Eye-Ficard.• Check that the terminals are clean.• Confirm that the Eye-Fi card is correctlyinserted.14Out of memory. Delete images or insert a new memory card. 14, 29,77
