90Shooting Options: The Shooting MenuShooting, Playback, and Setup MenusPreset ManualPreset manual is used with mixed lighting or to compensate for light sourceswith a strong color cast (for example, to make pictures taken under a lampwith a red shade look as though they had been taken under white light).1 Place a white or gray reference object under the lighting thatwill be used during shooting.2 Use the rotary multi selector to choose[fPreset manual] in the white balancemenu, and press d.The camera zooms in.3 Choose [Measure].To apply the most recently measured value for presetmanual, choose [Cancel] and press d.4 Frame the reference object.5 Press d.The shutter is released and the new white balance value is set.No pictures are recorded.k Note on Preset ManualRegardless of the flash mode selected, the flash will not fire when d is pressed in step 5. There-fore, the camera cannot measure a value for preset manual for when the flash is used.White balanceExitAutoAutoDaylightDaylightAutoDaylightIncandescentIncandescentFluorescentFluorescentPreset manualIncandescentFluorescentPreset manualExitMeasureCancelExitMeasureCancelPreset manualReference object frame