124Technical NotesError MessagesThe following table lists the error messages and other warnings displayed in themonitor, as well as the solutions for dealing with them.Display Problem Solution AO (blinks) Clock not set. Set clock. 98B Battery running low. Prepare to replace batteries. 14, 114NBattery exhausted.Battery exhausted. Replace batteries.PBattery temperaturehighBattery temperature is high. Turn off camera, and allowbattery to cool down beforeresuming use. After 5seconds, this message willdisappear, the monitor willturn off, and the power-onlamp and flash lamp willblink rapidly. After thelamps blink for threeminutes, the camera willturn off automatically.Pressing the power switchalso turns off the camera.14Q (blinks red) Camera cannot focus. • Refocus.• Use focus lock.24, 25,48PPlease wait for thecamera to finishrecording.Camera cannot performother operations untilsaving is complete.Wait until message clearsfrom display automaticallywhen saving is complete.25NMemory card is writeprotected.Write-protect switch is in“lock” position.Slide write-protect switch to“write” position.19PThis card cannot beused.Error accessing memorycard.• Use approved card.• Check that connectorsare clean.• Confirm that memorycard is correctly inserted.1221818PThis card cannot beread.
