62More on PlaybackTaking a Closer Look: Playback ZoomRotating the zoom control to g (i) during full-frameplayback mode (A 26) zooms the current image, withthe center of the image displayed in the monitor.• The guide displayed in the right bottom in themonitor will show which part of the image iscurrently displayed.The following operations can be performed while images are zoomed in.Images taken using Face DetectionWhen the zoom control is rotated to g (i) during full-frame playback mode for images taken using FaceDetection (A 24), the image will be enlarged with theface detected with shooting at the center of themonitor.• If several faces are detected, the image will beenlarged using the face that was focused on duringshooting time as the centralized point, and pressing the multi selector H, I, Jor K will enable you to switch between the people’s faces.• Rotate the zoom control toward g (i) again or toward f (h) to zoom in orout as normal.To Use Description AZoom in g (i) Zoom increases each time the zoom control isrotated to g (i), up to about 10×. –Zoom out f (h)Zoom decreases each time the zoom control isrotated to f (h). When the magnificationratio reaches 1×, the display returns to full-frameplayback mode.–View other areas ofimagePress the multi selector H, I, J or K to scrollto areas of the image not visible in themonitor.11Switch to full-frameplayback k Press k. 26Crop image d Press d to crop current image to containonly the portion visible in the monitor. 72Switch to shootingmodeAPress A or the b (movie-record) button. Youcan also press the shutter-release button toreturn to shooting mode.10b3.03.03.0××22.0.02.0××