102Basic Camera Setup: The Setup MenuShooting, Playback and Setup Menusd Blink WarningChoose whether or not blinking eyes are detected when using face detection(A 24) in the following shooting modes.• G (easy auto) mode• Portrait (A 36) and Night portrait (A 37) scene modesOperating the Did someone blink? ScreenThe following operations are available while the Didsomeone blink? screen is displayed.If no operations are performed for a few seconds, thescreen automatically returns to the shooting modescreen.Press d M z (setup menu) (A 86) M d Blink warningOnWhen the camera detects that one or more human subjects have closed their eyesshortly after recognizing the faces and shooting them, the Did someone blink?screen will appear on the monitor. The face of the human subject that may haveclosed his/her eyes is framed by a yellow border. In such a case, you can check theshot picture and determine if you take the picture again. ➝ “Operating the Didsomeone blink? Screen” (A 102)Off (default setting)Blink warning doesn’t take effect.To Use DescriptionEnlarge and display the faceof the person who blinked g (i) Rotate the zoom control to g (i).Switch to full-frame playback f (h) Rotate the zoom control to f (h).Select the face to bedisplayedIf the camera detects more than onehuman subjects with their eyes closed,press HIJ K during the enlargeddisplay to switch over the face displayed.Delete the shot picture l Press l.Switch to shooting modekPress k or the shutter-release button.ExitExitDid someone blink?
