24 Other FunctionsWhen Record location data in Location data options of the z (locationdata options) menu (A22) is set to On, the camera starts receiving signalsfrom the positioning satellites.Location data reception can be checkedon the shooting screen.• n or o: Signals are being receivedfrom four or more satellites, or fromthree satellites, and positioning isbeing performed.• z: Signals are being received, butpositioning is not possible.• y: Signals are not received.Recording the Shooting Location Data on the Image• When shooting while positioning is being performed, the obtained locationdata (latitude and longitude) are recorded on the images to be shot.• The recorded location data can be checked on a map with ViewNX 2 aftertransferring the image to a computer.Recording the Log• When selecting Start log in Create log in the location data options menu,while positioning is being performed, the location data of places you visitwith the camera is recorded at the certain interval.• After the recorded log is saved to a memory card by using Save log in thelocation data options menu, view the log with software that can display logdata.• Log data is NMEA format-compliant. However, display in all NMEA format-compliant software or on all NMEA format-compliant cameras is notguaranteed.Displaying POI Information• When Embed POI in Points of interest (POI) of the location data optionsmenu is set to On, the nearest location name information for the currentposition is also recorded on the images to be shot.• When Display POI of the location dataoptions menu is set to On, the nearestlocation name information for the currentposition is displayed on the shooting screen,and the location name information recordedon the image is displayed on the playbackscreen.Using Location Data Functionsmm 00 ssF5.6F5.6 8408402525 mm 00 ssF5.6F5.61/2501/250mm 00 ssF5.6F5.6 8408402525 mm 00 ssF5.6F5.61/2501/250