68Connecting to Televisions, Computers, and PrintersConnecting to Televisions, Computers, and PrintersConnecting to a TVConnect the camera to a television using the A/V cable to play back pictureson the television.1 Turn off the camera.2 Connect the camera to the TV using the supplied A/V cable.Connect the yellow plug to the video-in jack on the TV, and the white plug to theaudio-in jack.3 Tune the television to the video channel.See the documentation provided with your television for details.4 Hold down i to turn on the camera.The camera enters playback mode, and the picturestaken will be displayed on the television.While connected to the TV, the camera monitor willremain off.j Before Connecting the CameraUse a fully charged battery or the AC Adapter EH-62D (available separately from Nikon) toprevent the camera from turning off unexpectedly while connected.j Connecting an A/V CableWhen connecting the A/V cable, be sure that the camera connector is oriented correctly. Donot use force when connecting the A/V cable to the camera. When disconnecting the A/Vcable, do not pull the connector at an angle.j Video ModeBe sure that the camera’s video mode setting conforms to the standard used by your televi-sion. The video mode setting is an option set in the setup menu (c 98) > [Interface] (c 111)> [Video mode].WhiteYellow
