105Basic Camera Setup: The Setup MenuShooting, Playback and Setup Menusi Sound SettingsAdjust the following sound settings.k Auto OffWhen the camera is on and a period of time passes without any operations beendone, the camera will enter standby mode (A 15) to save power. Once in standbymode, the power lamp will blink, and if no operations are performed for anotherthree minutes the camera turns off. To exit standby mode press either the powerswitch or the shutter button. The time taken to enter standby mode can be set to30 s, 1 m (default setting), 5 m, or 30 m.C Notes on Auto OffRegardless of the option selected, the monitor will remain on for three minutes when menus aredisplayed, or for 30 minutes during slide show playback or when the AC adapter is connected.Button soundTurn button sound On or Off.When On (default setting) is selected, a beep will sound once when operations arecompleted successfully, two times when focus has been locked, and three timeswhen an error is detected , and welcome sound.Shutter soundChoose shutter sound from On (default setting) or Off.
