63Connecting to a ComputerConnecting to Televisions, Computers and PrintersTransferring Pictures from a Camera to a Computer1 Start the computer to which Nikon Transfer was installed.2 Turn off the camera.3 Connect the camera to the computer using the supplied USB cable.4 Turn on the camera.The power-on lamp will light.Windows VistaWhen the AutoPlay dialog is displayed, select Copypictures to a folder on my computer using NikonTransfer. To bypass this dialog in the future, check Always do this for this device:.Nikon Transfer will start.Windows XPWhen the AutoPlay dialog is displayed, select Nikon Transfer Copy pictures to afolder on my computer, and click OK. To bypass this dialog in the future, checkAlways use this program for this action.. Nikon Transfer will start.Mac OS XNikon Transfer will start automatically if Yes was selected in the Auto-Launch settingdialog when Nikon Transfer was first installed.B Connecting the USB CableWhen connecting the USB cable, be sure that the connectors are oriented correctly.Do not use force when connecting the USB cable. When disconnecting the USB cable, do not pullthe connector at an angle.Connection may not be recognized when the camera is connected to a computer via a USB hub.
