27Step 1 Turn the Camera On and Select A (Auto) ModeBasic Photography and Playback: A (Auto) ModeIndicators Displayed in A (Auto) ModeWhen the monitor has turned off in standby mode to save power (the power-onlamp is blinking) (A 162), press the following buttons to turn it back on.- Power switch, shutter-release button, A button or b (e movie-record)button33Shooting modeA displayed in A (auto)mode.Internal memory indicatorIndicates that images will be saved in the camera’s internal memory (approximately20 MB).When a memory card is inserted in the camera, C does not appear and images will besaved on the memory card.Vibration reductionindicatorThe effects of camerashake are reduced.Motion detection iconThe effects of the subjectmovement and camerashake are reduced.B Note on Touch ShutterAt the default setting, the shutter can be released by simply tapping a subject in the monitor(A 47). Take care that you do not release the shutter accidently.D Functions Available in A (Auto) Mode• When the camera is pointed at a human face, the face detection function, with which the cameraautomatically detects that face and focuses on it, activates (A 30).• Shooting settings (A 44) can be changed by tapping the left or bottom tab to display the settingcontrols.D Vibration Reduction and Motion DetectionSee Vibration reduction (A 158) or Motion detection (A 159) in the setup menu (A 149) formore information.
