I~ Starting Nikon Transfer 2If there are a large number of images on the memory card, it may take some time for NikonTransfer 2 to start.~ Powering the Camera During Image Transfer• When connecting the camera to a computer, use a battery with a sufficient amount ofcharge remaining to prevent the camera from turning off unexpectedly.• When the camera is connected to a computer via the supplied USB cable with Auto(default setting) selected for the Charge by computer option in the setup menu, thebattery inserted into the camera is automatically charged. The charge lamp blinks slowlywhile the battery is charging.• Pages 162 and 187 of the User's Manualra1 Transferring Images Using a Commercially-available Card Reader or a Computer's Card SlotThe following methods can also be used to transfer images saved on a memory card to acomputer.• Connect a commercially-available card reader to the computer, and then insert thememory card.• Insert the memory card directly into the computer's card slot.1.3 Confirm that the correct source is selected.Confirm that the camera or removable disk appears as a device button in the "Source"panel of the Nikon Transfer 2 "Options" area.Device button1.4 Click Start Transfer.At default settings, all the images on the memory card will be copied to the computer.Click Start Transfer~ Using ViewNX 2
