E106Reference SectionRefer to the table below if an error message is displayed.Error MessagesDisplay Cause/Solution ABattery temperatureis elevated. Thecamera will turn off. The camera turns off automatically. Wait untilthe camera or battery temperature has cooledbefore resuming use.–The camera will turnoff to preventoverheating.Memory card is writeprotected.The write-protect switch is in the “lock” position.Slide the write-protect switch to the “write”position.–This card cannot beused.An error occurred while accessing the memorycard.• Use an approved memory card.• Check that the terminals are clean.• Confirm that the memory card is correctlyinserted.7, F19This card cannot beread.Card is notformatted. Formatcard?The memory card has not been formatted foruse in the camera.Formatting deletes all data saved on thememory card. If you need to keep copies of anyimages, make sure to select No and save thecopies to a computer or other medium beforeformatting the memory card. Select Yes andpress the k button to format the memory card.7, F5Out of memory. Delete images or insert a new memory card. 7, 19Image cannot besaved.An error occurred while saving the image.Insert a new memory card or format thememory card or internal memory.7,E103The camera has run out of file numbers.Insert a new memory card or format thememory card or internal memory.7,E103There is insufficient space to save the copy.Delete images from the destination. 19Image cannot bemodified. Check that the images can be edited. E26,F12