168Menu Guide—Custom SettingsCustom settings are used to fine-tune a variety of camera settings to suit theuser’s preferences, creating combinations of settings that differ from the fac-tory defaults in effect at the time your camera was purchased. In addition toCustom Settings C (Bank select) and R (Menu reset), settings in the CSM(Custom Settings) menu are divided into the following six groups:Custom Settings Fine-Tuning Camera SettingsPress the multi selector up or down to highlightthe desired group and then press the multi se-lector to the right. The full list of Custom Settingsa1–f7 will be displayed, starting with the settingsin the selected group. To select a setting in a dif-ferent group, press the multi selector up or downscroll until the desired setting is displayed, or press the multi selector to theleft to return the top menu and select a different group. Custom Setting a1(AF-C mode priority) and f7 (No CF card?) are linked: pressing the multi se-lector up when Custom Setting a1 is highlighted displays Custom Setting f7,while pressing the multi selector down while Custom Setting f7 is highlighteddisplays Custom Setting a1.Using the Multi SelectorThe multi selector can be used at any time when the monitor is on. The focus selectorlock switch only takes effect when the monitor is off.Group Custom SettingsAutofocus a1–a8Metering/Exposure b1–b7Timers/AE&AF Lock c1–c5Shooting/Display d1–d6Bracketing/Flash e1–e8Controls f1–f7abcdef
