383UAdjust settings for optional WR-R10 wireless remote controllersand for optional radio-controlled flash units that supportAdvanced Wireless Lighting.❚❚ LED LampEnable or disable the status LEDs on a WR-R10 wireless remotecontroller mounted on the camera. For more information, see thedocumentation supplied with the wireless remote controller.❚❚ Link ModeChoose a link mode for connection to WR-R10 wireless remotecontrollers mounted on other cameras or radio-controlled flashunits that support Advanced Wireless lighting. Be sure that thesame mode is selected for the other devices.Regardless of the option selected for Link mode, signals frompaired wireless remote controllers will always be received by theWR-R10. Users of the WR-1 remote controller will need to selectpairing as the WR-1 link mode.Wireless Remote (WR) Options G button ➜ B setup menuOption DescriptionPairing To pair the camera with other devices, mount the WR-R10 onthe camera and press the pairing button.PINConnect by entering the device PINcode. Press 4 or 2 to highlight digitsand press 1 or 3 to change, then pressJ to enter and display the selected PIN.A The WR-R10 Wireless Remote ControllerThe WR-R10 connects to the camera using a WR-A10 adapter. Be surethe firmware for the WR-R10 has been updated to the latest version. Forinformation on firmware updates, see the Nikon website for your area.
