97Taking Photographs—Flash PhotographyUsing the Built-in SpeedlightFollow these steps when using the built-in Speedlight with a CPU lens.1 Rotate the mode dial to the desired setting( 10). If , , , or mode is selected,proceed to Step 4 ( 98). i-TTL Balanced Fill-Flash for Digital SLR will be selected, and thebuilt-in Speedlight will pop-up automaticallywhen required.2 Choose a metering method. In P, S, and Amodes, the metering method determines thetype of fl ash control used ( 94); select matrixor center-weighted metering to activate i-TTLBalanced Fill-Flash for Digital SLR. Standard i-TTL Flash for Digital SLR is activated automati-cally in mode M and when spot metering isselected in modes P, S, and A.3 Press the button. The built-in Speedlightwill pop up and begin charging. When theSpeedlight is fully charged, the flash-readyindicator will light.Auto Flash ( , , , and Modes)The built-in Speedlight can not be raised and fired manually in , , , andmodes. Once raised, the built-in Speedlight will only fire when required for additionallighting.Red-Eye ReductionSome lenses may block the red-eye reduction lamp, preventing the subject from seeingthe lamp and interfering with red-eye reduction.When the Speedlight Is Not in UseTo save battery power when the Speedlight is not in use, return it to the closed positionby pressing it lightly downward until the latch clicks into place.
