59Printing Via Direct USB ConnectionMore on PlaybackDisplay confirmation dialog. Press the multi selector up or down to highlight option, pressI (the center of the multi selector) to select.• Select Start print to start printing. To interrupt printing, press I, then turncamera off and disconnect USB cable.• Select Cancel to exit without printing pictures.Message shown above at right is displayed when printing is complete. Turn cameraoff and disconnect USB cable.Before PrintingBefore printing via direct USB connection, make sure that the printer supports PictBridge or USBDirect and check printer settings. See the printer manual for details.Use a Reliable Power SourceWhen printing pictures via direct USB connection, be sure the battery is fully charged. If in doubt,recharge the battery before printing or use the optional EH-62B AC adapter.DPOF PrintingThe DPOF printing option is only available if a print order has been created.Error MessagesIf an error message is displayed, an error has occurred. After checking theprinter and resolving any problems as directed in the printer manual, high-light Resume and press I to resume printing. Select Cancel to exit with-out printing the remaining images.PictBridgePictBridge is an industry standard for direct printing that ensures compatibility when different de-vices are connected.5 DPOF PRINTINGDPOF PRINTING:Set:SetConfirmCancelStart printPrinter ready?007 printsPrinting002/007:Cancel:CancelDone:Resume:ResumeYOU MAY TURNOFF THE CAMERA+ +PRINTER ERRORCHECK PRINTERSTATUSResumeCancel
