Nikon F75D - F75 QD = N75 35mm SLR Camera Body Only Instruction Manual

117116• Use two CR2-type 3V lithium batteriesUse two CR2-type 3V lithium batteries.• Change the batteries well before the end of their life and prepare spare batteriesbefore important photographic occasions.• Turn the camera power off when changing batteriesTurn the camera power off before changing batteries and insert the batteries with ´and ‰ ends positioned correctly.• Stains on the battery poles may cause lack of contact. Wipe the batteries well with adry cloth before installing.• Use fresh batteries at low temperaturesBattery power diminishes at extremely low temperatures and the camera may notfunction properly with old batteries. Use a fresh set of batteries at low temperatures,keep spare batteries warm, and use them alternately.• Film advance speed lowers and number of usable film rolls becomes less at lowtemperatures. However, battery power may recover when the temperature returns tonormal.• Do not throw batteries into a fire or short circuit batteriesDo not throw batteries into a fire. Do not short, disassemble, heat or charge batteries.WARNING Do not leaveKeep batteries out of children’s reach.If someone accidentally swallows batteries,call a doctor immediately.Notes on Batteries TroubleshootingLCD panel Viewfinder©EE blinks ƒEE blinks©EE blinks ƒEE and ‡blinkM appears m appears(When exposuremeter is on)M blinks m blinks(appears without (appears withoutblinking when blinking whenexposure meter exposure meteris off) is off)o––, M and ∑ and mframe counter blinkblink©-- blinks ƒ-- blinksCause• CPU Nikkor lens otherthan G-type is not set toits minimum aperture.• Attached Speedlight isnot set at TTL Auto Flashin a, Vari-Program orP mode.• Batteries are nearingexhaustion.• Batteries are just aboutexhausted.• Batteries are exhaustedduring film rewind.• Non-CPU lens isattached or lens is notattached.Page19,10511017177818,106Remedy• Set lens to minimumaperture.• Set the Speedlight flashmode to TTL, or set thecamera’s exposuremode to S, A or M.• Have fresh ones ready.• Turn the power off andreplace batteries withnew ones.• Turn the power off,replace batteries withnew ones and turn thepower on again. If thiswarning appearsfrequently, contactauthorised Nikon dealeror service centre.• Attach CPU lens. With anon-CPU lens, set theexposure mode to Mand set the aperturewith lens’ aperture ring.MISCELLANEOUSwww.mynikon.com.pl