En9Connecting the Optional MC-DC2Connecting the Optional MC-DC2An optional MC-DC2 remote cord for remoteshutter release can be connected to the GP-1Aaccessory terminal (). When connecting theMC-DC2, be sure the connector is in the correctorientation; do not use force.Mounting the GP-1A on the CameraMounting the GP-1A on the Camera Page 1 of 2Page 1 of 2The Camera Accessory ShoeThe Camera Accessory ShoeThe GP-1A is equipped with a mount () that fitsthe camera accessory shoe. Slide the GP-1A ontothe camera accessory shoe as shown.DD Disconnecting the GP-1ADisconnecting the GP-1ATurn the camera off, disconnect the cable, andthen replace the ten-pin terminal cap or close theaccessory terminal cover.