21JpEnDeFrEsSeRuNlItCkChKr The built-in flash and vignettingTo prevent vignetting, do not use the lens hood.Cameras Supported focal length/Shooting distanceF70-Series/N70* • 85 mm/2 m (6.6 ft.) or greater• 105 mm or longer/No restrictionF60-Series/N60* • 105 mm/2.5 m (8.2 ft.) or greater• 135 mm or longer/No restrictionF50-Series/N50* • 135 mm/2.5 m (8.2 ft.) or greater• 200 mm/No restrictionF65-Series/N65-Series*,F55-Series/N55-Series*• 105 mm/3 m (9.8 ft.) or greater• 135 mm or longer/No restrictionF75-Series/N75-Series*,Pronea 600i/6i*• 85 mm/2.5 m (8.2 ft.) or greater• 105 mm or longer/No restrictionPronea S • 200 mm/2 m (6.6 ft.) or greater*Sold exclusively in the U.S.A. Using the lens hoodLens hoods minimise stray light and protect the lens.Attaching the hood• Be sure that the lens hood mounting index ( ) is alignedwith the lens hood setting index ( ) (3).• To facilitate attachment or removal of the hood, holdit by the base (near the lens hood attachment index( )) rather than its outer edge.• If the lens hood is not correctly attached, vignettingmay occur.• To store the lens hood, attach it in the reverseposition.Detaching the hoodWhile holding down the lens hood lock release button(1), turn the hood clockwise (as viewed from thecamera side) (2, 3).