23JpEnDeFrEsSeRuNlItCkChKr Lens care• Be careful not to hold the camera body when the lens is attached, as this maycause damage to the camera (lens mount). Be sure to hold both the lens andcamera when carrying.• Be careful not to allow the CPU contacts to become dirty or damaged.• If the lens mount rubber gasket is damaged, be sure to visit the nearest Nikon-authorized service representative for repair.• Clean lens surfaces with a blower brush. To remove dirt and smudges, use a soft,clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens cleaner.Wipe in a circular motion from the center to outer edge, taking care not to leavetraces or touch other parts of the lens.• Never use organic solvent such as thinner or benzene to clean the lens.• NC filters are available to protect the front lens element. The lens hood alsohelps to protect the front of the lens.• When storing the lens in its flexible lens pouch, attach both the front and rearlens caps.• When the lens is mounted on a camera, do not pick up or hold the cameraand lens by the lens hood.• When the lens will not be used for an extended period of time, store it in acool, dry place to prevent mold and rust. Be sure to store the lens away fromdirect sunlight or chemicals such as camphor or naphthalene.• Do not get water on the lens or drop it in water as this will cause it to rust andmalfunction.• Reinforced plastic is used for certain parts of the lens. To avoid damage, neverleave the lens in an excessively hot place. Standard accessories• 77mm snap-on Front Lens Cap LC-77• Rear Lens Cap LF-1• Bayonet Hood HB-48• Semi-soft case CL-M2 Optional accessory• 77mm screw-on filters• AF-S Teleconverters (TC-14E /TC-17E /TC-20E )