Nikon One-Touch Zoom 90s One-Touch Zoom 90s AF Quartz Date Repair Manual

Contents

specifications

FCA54001-R.3567.A- R4 • One Touch Zoom 90s AF -Item Standard of judgment Method and toolsSpeed light Automatic flash changeaccuracyW: Bv 5.625±1EvT: Bv 8.875±1EvAE testerColor temperature ·5800°K±300Measure the temperature at point and line flash.Minolta colorMeter Ⅲ FRed eye reductionaccuracy·Brightness should be approx. 10 LUX or more.Measure the brightness at a position 30cm awayfrom the camera front finder cover in a darkroom.Minolta digitalilluminometer T-1Film advance Film scratch ·The photographed picture must not have harmfulscratch.Take pictures with two films and observe the pic-tures from beginning to end.Fuji Neopan SSPower supply(1)Film damage ·Film must not have damage which affectsadversely the film advance and the photographedpicture.Check negative film for damage.Fuji Neopan SSPower supply(1)Space between pictures ·Within 0.5 ～ 3.5mm in the specified picturenumber·The specified number of pictures must be taken.Overlap of the last frame (out of the specifiednumber) is allowable.Check the space between pictures with the nega-tive film which has been used to the last frameat 36EX.Take pictures by 18 shots at T/W in the forcedinfinity mode.Fuji Neopan SSPower supply(1)And (3)Visual checkPicture size ・24+0.8 –0.3mm×36+0.8 –0.3mmCheck the picture size with negative film.Take pictures at W/T in the forced infinitymode.Fuji Neopan SSVernier calipersPicture position ·Up and down direction: 0.2mm or more betweenthe picture and perforation There must be noextreme inclination.Check the picture positionwith the negative film which has been used inT/W photography.After one frame of picture hasbeen photographed, add vibration of reliabil-ity, take a picture again and check its posi-tion.Fuji Neopan SSPower supply(1)And (3)QD copy center position ·X=11.5mm Y=-9mmWhen all the digits are copied, the bottom ofcharacters must be 2.7±0.5 from the outline ofthe negative film and their right side must be4.5±0.5.Check the position with the negative film whichhas been used at W end and M/T from the front oflens barrel.Fuji Neopan SSInspection jig andtoolTime of each operation ·One frame advance: Within 1 secondMeasure the time after release.·36EX rewinding: Within 40 secondsStart measurement the moment the last frame isreleased.Fuji ISO100Power supply(1)Stop watch

/ 57

Related manuals for Nikon FCA54001