Nikon One-Touch Zoom 90s One-Touch Zoom 90s AF Quartz Date Repair Manual

Contents

specifications

FCA54001-R.3567.A- M5 • One Touch Zoom 90s AF -(22) Error display(22) Error display How to release１ Lens barrel NG ｎ 2 When the lens barrel is in the middle of WIDE and TELE,press lightly the release button, press the zoom button,main switch button and MU button and open and then closethe camera back. Consequently the initial condition is set.When the lens barrel is in the push-in position, press themain switch button, open and then close the camera backand press the MU button. Consequently the initialcondition is set.If the same error is displayed though the above procedure isperformed, disassemble and repair the camera.２ Shutter NG ｎ 3ｎ 1３ FFS NG４ 1 frame advance NG５ Rewinding NGLoad the battery again, open and then close the cameraback, press the MU button and press lightly the release button.Consequently the initial condition is set.If the same error is displayed though the above procedure isperformed, disassemble and repair the camera.If FFS fails, the operation stops just under the condition and“E” blinks.The error condition is released by opening the camera back.If 1 frame advance fails, automatic rewinding starts and, whenrewinding is ended, “0” blinks.The error condition is released by opening the camera back.If an accident is caused during rewinding and so emergency stopoccurs, the counter blinks at that time to show that the camerais in an abnormal condition.Open the camera back in a dark box, take out the film and closethe camera back.