10 Transfer, Control, and HTTPEthernet ConnectionsStep 1: Connecting the EquipmentBefore proceeding with the following steps, start the computerand log in.1 Insert a memory card.Turn the camera off and insert a memory card (do not turn thecamera off or disconnect the Ethernet cable while data arebeing transferred to the computer). This step can be omittedin camera control mode (035).2 Attach the WT-7 (0 4).3 Connect an Ethernet cable.Connect the Ethernet cable as shown below. Do not use forceor insert the connectors at an angle.4 Turn the camera on.Rotate the power switch to turn the camera on.5 Press the power switch for about asecond to turn the WT-7 on.Power switch
