Nikon WT-7 User Manual

36 Transfer, Control, and HTTPCamera ControlA Ethernet NetworksDo not disconnect the Ethernet cable while the camera is on.D Wireless NetworksOperations may take longer on wireless networks. If the signal isdisrupted while pictures are being transferred to Camera Control Pro 2,the LED on the WT-7 will flash orange; turn the camera off and then onagain. Transfer will resume when the connection is re-established. Notethat transfer can not be resumed if you turn the camera off again beforetransfer is complete.A Network StatusThe status of the link between the host and the WT-7 is shown by thestatus LEDs and by the display in the top level of the network menu.The Status LEDsStatus POWER LINK ERRORWT-7 off I (off ) I (off ) I (off )USB cable not connected K (on) I (off ) I (off )Connecting to host K (on) K (on) I (off )Waiting to send or sending data K (on) H (flashes) I (off )Connection error K (on) I (off ) H (flashes)WT-7 hardware or battery malfunction H (flashes) H (flashes) H (flashes)The POWER LED lights when the WT-7 is on.Signal quality is shown by the LINK LED: thefaster the LED flashes, the better the signal andthe faster data can be transmitted. The ERRORLED flashes to show that an error has occurred.