Niles A4.6Ci Installation & Operation Manual

Contents

Niles A4.6Ci Installation & Operation Manual Manual pdf 42 page image

42CONNECTIONSHOME THEATER CONTROL SYSTEM7. Voltage Sync from a Source Component to anA4.6Ci Sync InputWhen obtaining a 12V sync signal from a source compo-nent (refer to the Source Power Synchronization section ofthis manual for more information), a Niles Accessory Cable(FG00724) connected to a Radio Shack 274-326 mini-plugto male RCA adapter provides proper connection to any ofthe three source sync Inputs.KEYPAD MODULES8. Keypads to Keypad Inputs for Zones 1-6Four-pair twisted cable, terminated with male RJ-45plugs, connects the keypads to the zoned keypad inputs(for more information on Terminating Four-Pair TwistedCable, refer to page 39).PREAMPLIFIER ZONE OUTPUTS1. Zones 1- 6Male to male RCA audio cables connect Zone Outputs1-6 to an external amplifier.1. Zones 1- 6DB-25 Audio Cables (1-to-1 pin configuration) connectZone Outputs 1-6 to a Niles multi-channel amplifier.HOME THEATER CONTROL SYSTEM1. IR Output of a Home Theater Control System to the IR InThe mini-plug end of a Niles Accessory Cable(FG00724) connects a Home Theater control system tothe IR input.12V CONTROL SIGNALS1. 12V Control Output to a Voltage Triggered DeviceThe mini plug end of a Niles Accessory Cable (FG00724)connects the 12V control output to the trigger input of avoltage-activated device (i.e., Niles AC-3).IR FLASHERS1. Low-Output Flasher to the Flasher OutputsThe mini-plug end of a Niles Low-Output MicroFlasher,™Model IRC-2P (FG00726), connects into the FlasherOutputs 1-4. The Micro-Flasher portion of the IRC-2P isplaced directly over the IR sensor of the correspondingsource component (Source 1 for Flasher 1, Source 2 forFlasher 2, Source 3 for Flasher 3, Source 4 for Flasher 4)and adheres with the included peel-back tape.1. High Output Flasher to the Flasher OutputsThe mini plug end of a Niles High-Output Flasher, ModelIRC-1P (FG00932), connects to the Flasher Output 4labeled ADJUST. The IRC-1P is strategically positioned toprovide IR transmission to all source components andadheres with its included Velcro mounting system.DC POWER1. DC Power AdapterThe 16V DC power adapter (included with the A4.6Ci)connects to the removable power-cord socket and to anAC power outlet.891011121314157