Nilfisk-ALTO ATTIX 3 Operating Instructions Manual

Also see for ATTIX 12 GALLON RDF: Operating instructions Specifications Operating instructions Operating instructions Operating instructions

Contents

Nilfisk-ALTO ATTIX 3 Operating Instructions Manual Manual pdf 5 page image

31) Option depending on modelOriginal Instruction ManualATTIX 3 / 5 / 7 / 12 GALLON / 19 GALLONUse only the brushes suppliedwith the vacuum cleaner orspecified in the operating manu-al. The use of other brushes canadversely affect safety.Use only original Alto accesso-ries and spare parts (see sec-tion 9.5). The use of other partscan adversely affect safety.Accessories and spare parts2 Description2.1 Purpose When used properly, theindustrial vacuum cleanersdescribed in these instructionsare suitable for sucking up dry,non-flammable, non-hazardousdusts and liquids.2.2 Operating elements See fold-out page at front ofthese operating instructions.1 Handle2 Suction pipe support3 Accessory holder4 Applicance switch with suc-tion power control1)5 Retaining clamp6 Dirt tank7 Grip to empty tank 1)8 Inlet fitting9 Appliance socket 1)10 Cable hook11 Operating knob for filtercleaning 1)12 Connection for compressedair supply 1)13 Connection for pneumatictool 1)14 Tank locks 1)15 Castor with brake3 Before starting3.1 Assembling thevacuum cleaner1. The mains plug should not yetbe inserted into a socket.2. Open the retaining clamps (1)and remove upper section ofthe cleaner.3. Take the accessories 1) out ofthe dirt tank and the packag-ing.4. Place a filter bag into the tankas described in the instruc-tions (printed on the filterbag).IMPORTANT!Press the filter bag connectionfirmly on to the inlet fitting.5. Fit the upper section of thecleaner (do not damage thefilter bag) and close the re-taining clamps.NOTE!Ensure that the retainingclamps fit properly.6. Fit the suction tube fastener 1)about 20 cm from the edge ofthe lower extension tube asshown in the figure.1On delivery some of the accesso-ries are lying in the tank and mustbe removed before the vacuumcleaner is used for the first time.Remove the upper section of thevacuum cleaner: The mains plugshould not yet be inserted into asocket.