Nilfisk-ALTO ATTIX 3 Operating Instructions Manual

Also see for ATTIX 12 GALLON RDF: Operating instructions Specifications Operating instructions Operating instructions Operating instructions

Contents

Nilfisk-ALTO ATTIX 3 Operating Instructions Manual Manual pdf 8 page image

6 1) Option depending on modelOriginal Instruction ManualATTIX 3 / 5 / 7 / 12 GALLON / 19 GALLON5.1.1 Picking up dry sub-stancesCAUTION!Do not pick up flammablesubstances.Before picking up dry sub-stances, always ensure that afilter bag is inserted in the tank(see section 9.5 "Accessories"for order number). Disposal ofthe picked up material is thensimple and hygienic.After picking up liquids, the filterelement is wet. A damp filterelement clogs more quicklywhen dry substances arepicked up. For this reason thefilter element should be washedand dried or replaced by a dryelement before dry substancesare picked up.5.1.2 Picking up liquids CAUTION!Do not pick up flammableliquids.Before liquids are picked up,always remove the filter bag/waste bag and check that thefloat 1) or the water level limit 1)works properly. (See section7.2.4 and 7.2.5 “Replacing thefilter element“.)The use of a separate filter ele-ment or filter screen is recom-mended.If foam appears, stop work im-mediately and empty the tank.To reduce the amount of foam,use foam killer Alto Foam Stop(see section 9.5 "Accessories"for order number).6 After finishing work6.1 Switching the vacuumcleaner off and storage1. Switch off the vacuum clean-er and pull the mains plugout of the socket.2. Wind up the power cord andhang it on the handle.3. Empty the tank and cleanthe vacuum cleaner.4. After picking up liquids:Store the upper section ofthe cleaner separately sothat the filter element candry.5. Store the cleaner in a dryroom where it is protectedfrom unauthorized use.ATTIX 12 GALLONATTIX 3ATTIX 5 ATTIX 19 GALLONATTIX 7