Nilfisk-ALTO ATTIX 360-2M Operating Instructions Manual

Contents

Nilfisk-ALTO ATTIX 360-2M Operating Instructions Manual Manual pdf 12 page image

10englishATTIX 360-2MATTIX 550-2M / ATTIX 560-2MXCATTIX 751-2M / ATTIX 761-2MXC1) Option depending on model7.2 Maintenance work7.2.1 Replacing the wastebagATTIX 360-2M/550-2M/560-2MXC:1. Open the retaining clamps andremove the upper section of thecleaner from the dirt tank.2. Carefully remove the waste bagconnection (1) from the inlet fit-ting.3. Close the waste bag connectionwith the slide (2).4. Close the waste bag using thecable binder (3).5. Dispose of the dirt in accordancewith legal regulations.6. Insert a new filter bag into thecleaned tank as described in theinstructions enclosed.IMPORTANT: Press the filter bagconnection firmly on to the inletfitting.ATTIX 751-2M/761-2MXC:1. Remove the upper section ofcleaner from the dirt tank.2. Open the retaining clamps (1)and remove the intermediate ring(2) from the tank.3. Carefully remove the waste bagconnection from the inlet fitting.4. Close the waste bag using thecable binder (3).5. Dispose of the dirt in accordancewith legal regulations.6. Insert a new filter bag into thecleaned tank as described in theinstructions enclosed.IMPORTANT: Press the filter bagconnection firmly on to the inletfitting.7 Maintenance7.1 Maintenance planAfter finishing work As required7.2.1 Replacing the waste bag7.2.2 Replacing the filter bag7.2.3 Emptying dirt tank (ATTIX 3+5)7.2.4 Emptying the dirt tank (ATTIX 7)7.2.5 Replacing filter element(ATTIX 360-2M/550-2M/751-2M)7.2.6 Replacing filter element(ATTIX 560-2MXC/761-2MXC)When using ATTIX 360-2M/560-2MXC/761-2MXC clean them tho-roughly before replacing the wastebag - see sections 4.5 bzw.4.6.During the following work, ensu-re that dust is not unnecessarilyspread around. Wear a P2 brea-thing mask.311 1122123