Nilfisk-ALTO NEPTUNE 4 FA Operating Instructions Manual
Also see for NEPTUNE 4 FA: Service manualOperating instructionsQuick start guideOperating instructionsOperating instructions
                      | |
151) Options / model variantsOriginal instructionsNEPTUNE 4 FA7.2.4 Changing the pump oil 1. Unscrew the oil drain plug(A) on the pump housing anddispose of the old oil in ac-cordance with the disposalregulations.2. Check the drain plug gasketand screw in the plug again.3. Fill with oil and close the oilfiller plug.Oil grade and capacity seechapter ‘9.4 Technical Data’.7.2.3 Checking the pump oilquality1. Check colour of pump oil.If the oil has a grey or whiteshade, change the oil (seechapter 7.2.4)2. Top up cold pump with freshoil if necessary.Oil type see chapter 9.4Technical Data.7.2.5 Flame sensor1) 1. Remove the sensor andclean with a soft cloth.2. Ensure that the sensor iscorrectly seated when install-ing again - the symbols mustface upwards.A |
Related manuals for Nilfisk-ALTO NEPTUNE 4 FA
Nilfisk-ALTO BK 900 Operating Instructions Manual
Nilfisk-ALTO MH 3M Instructions For Use Manual
Nilfisk-ALTO SPINTEC 443 Instructions For Use Manual
Nilfisk-ALTO 56265302 Instructions For Use Manual
Nilfisk-ALTO Neptune 4 Series Supplement To Service Manual
Nilfisk-ALTO SCRUBTEC 770 S 05210F Operator's Manual
Nilfisk-ALTO FLOORTEC 480M User Manual
Nilfisk-ALTO FLOORTEC 480M User Manual
Nilfisk-ALTO SCRUBTEC BOOST 8 Operator's Manual And Parts List
Nilfisk-ALTO FLOORTEC 760 User Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine