INSTRUCTIONS FOR USE2 9096910000(1)2006-09INTRODUCTIONMANUAL PURPOSE AND CONTENTSThe purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe andautonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts anddisposal.Before carrying out any procedure on the machine, the operators and qualified technicians must read this Manual carefully.Contact Nilfisk-Advance in case of doubts regarding the interpretation of the instructions and for any further information.TARGETThis Manual is intended for operators and technicians qualified to perform the machine maintenance.The operators must not carry out procedures reserved for qualified technicians. Nilfisk-Advance will not be answerable fordamages coming from the non-observance of this prohibition.HOW TO KEEP THIS MANUALThe Instructions for Use Manual must be kept near the machine, inside an adequate case, away from liquids and othersubstances that can cause damage to it.IDENTIFICATION DATAThe machine model and serial number are marked on the plate (34).The machine model year is shown after the Date Code on the serial plate (A06 means January 2006).This information is useful when requiring machine spare parts. Use the following table to write down the machine identificationdata.OTHER REFERENCE MANUALS– Electronic battery charger Manual to be considered as integral part of this ManualMoreover, the following Manuals are available:– Service Manual (that can be consulted at Nilfisk-Advance Service Centers)– Spare Parts List (supplied with the machine)SPARE PARTS AND MAINTENANCEAll necessary operating, maintenance and repair procedures must be carried out by qualified personnel or by Nilfisk-AdvanceService Centers. Only original spare parts and accessories must be used.Contact Nilfisk-Advance for service or to order spare parts and accessories, specifying the machine model and serial number.CHANGES AND IMPROVEMENTSNilfisk-Advance constantly improves its products and reserves the right to make changes and improvements at its discretionwithout being obliged to apply such benefits to the machines that were previously sold.Any change and/or addition of accessories must be approved and performed by Nilfisk-Advance.OPERATION CAPABILITIESThese scrubber-dryers are used to clean (scrubbing and drying) smooth and solid floors, in civil or industrial environment, undersafe operation conditions by a qualified operator.The scrubber-dryer cannot be used for moquette and carpet cleaning.CONVENTIONSForward and backward, front and rear, left and right references are intended with the operator in driving position with the handson the handlebar (2).NOTEThe numbers in brackets refer to the components shown in Machine Description chapter.MACHINE model ..............................................................MACHINE serial number ..................................................