Nilfisk-Advance BA 451 User Manual

Also see for ecoflex BA 451: Service manual

Contents

USER MANUAL ENGLISHBA 451 - BA 451D - BA 531 - BA 531D 909 6748 000(3)2010-03 A 17Adjustment of the detergent concentration in the solution(For machine with EcoFlex™ system)The system used to mix the detergent with the washing water can be activated by pressing the detergent flow control switch (A, Fig.4): when the led indicator (B) is ON, the detergent is added to the washing water.The display (C) shows the detergent concentration level (1 to 6) in the solution: for the related percentage values refer to the table(D).In order to change the actual detergent concentration, proceed as follows:Turn off the detergent flow control switch (A) (the led indicator (B) must be OFF).1.Press and hold the detergent flow control switch (A) until the led indicator (B) flashes.2.Release the switch (A). Press it again shortly to go to the next level shown by the display (C); repeat the operation until the3.desired setting is reached.Wait until the led indicator (B) stops flashing: the new level is now set.4.NOTEDetergent percentage setting is stored into memory, even if the machine is turned off.EcoFlex™ switchPress the EcoFlex™switch (E, Fig. 4) whenever you temporarily need a greater washing power.When you press the switch (E) (the led indicator (F) is flashing) the solution flow increases (for machine with EcoFlex™ system)and the detergent concentration in the solution increases (moreover, if the detergent mixing function is not activated, it isautomatically activated).The original settings can be restored by pressing the switch (E) once again (the led indicator (F) is ON).NOTEIf the switch (E) is not pressed once again, the original settings are restored automatically after 60 seconds.BAEFCDFigure 4S311335