Nilfisk-Advance BR 1100S Service Manual

Also see for 56413006: Instructions for use Instructions for use - original instructions

Contents

Nilfisk-Advance BR 1100S Service Manual Manual pdf 17 page image

FORM NO. 56043122 - BR 1100S, 1300S - 15FUNCTIONAL DESCRIPTION OF CONTROL PANEL SWITCHES:(J) Detergent System ON/OFF switch – Pressing this switch will turn ON or OFF the detergent option. See the main programming options in thismanual to select (activate) the onboard detergent detergent delivery system.(C) Side Broom ON/Down Switch and (L) Side Broom OFF/UP Switch - These switches are only functional on the cylindrical scrub modelsequipped with side brooms. When the scrub system is ON the side brooms are lowered to the floor to the same position when the scrub systemwas last turned OFF (auto memory operating position). Note: There is a broom height over-ride adjustment function for raising or lowering the sidebrooms to obtain the corrected broom contact patterns in compensating for normal broom wear. To enter to adjust hold either the down (C) or up(L) side broom switches for 2-3 seconds (both switch indicators will flash) and then let go. You then have 3 seconds to press either switch to resetthe needed broom(s) working pattern position. The machine is now reprogrammed to work with the new setting.(M) Scrub Speed Switch – When the machine is operating in any one of its scrub settings the machine’s travel speed is reduced to the speedcontrollers pre-programmed 70% of its maximum transport speed. Pressing the switch increases (over-rides) the 70% max programmed scrubspeed to 100% of transport speed.FUNCTIONAL DESCRIPTION OF CONTROL PANEL INDICATOR LIGHTS:In general the following guidelines apply to the control panel indicatorsWhen the key switch (A) is first turned ON all of the Blue control panel indicator lights will turn on for 1 second for an operational test.A blue indicator means that a system is ON and running or has been enabled and ready to turn on when the drive pedal (throttle) is moved intoforward or reverse.Scrub OFF Indicator (E):• This indicator will be blue when the scrub system is OFF and is ready to be activated.• This indicator will be OFF when the scrub system has been turned ON.Scrub ON/Scrub Mode Select Indicator (D):• The left side indicator will be blue when the Normal scrub mode has been selected.• The right side indicator will be blue when the Heavy scrub mode has been selected.• Both the right and left indictor will be blue when the Extreme scrub mode has been selected.Solution System Indicator (F):• This indicator will be blue when the solution system has been enabled and or is turned ON.• This indicator will be OFF when the solution system has been turned OFF.• This indicator will fl ash blue when the solution tank fl oat senses a low solution level.Vacuum System Indicator (G):• This indicator will be blue when the vacuum system has been enabled and or is turned ON.• This indicator will fl ash blue when the vacuum system is operating in the time delay shut down mode (normal 5-10 seconds).• This indicator will be OFF when the vacuum system is disabled and turned OFF.Horn Indicator (H): Its blue indicator is ON when the horn is sounded and OFF when the switch is not pressed.Wand Switch Indicator (I): Its blue indicator is ON when the wand has been enabled or is turned ON and OFF when the switch is not selected.Detergent EDS System Indicator (J): Note the control board automatically recognizes that the machine has an operational detergent system through its wiringharness connection.• Its indicator will be blue to signal the operator that the system is enabled and turned ON.• This indicator will be OFF when the detergent system switch has been pressed to disable, have it turned OFF.Side Broom ON/Down Indicator (C):• Its indicator will be blue to signal the operator that the side brooms are in the down working position, enabled and turned ON.• This indicator will be OFF when the scrub system has been turned OFF brooms raised in there stored position.• This indicator will fl ash blue when the operator has entered the brush height adjustment mode.Side Broom OFF/UP Indicator (L):• Its indicator will be blue to signal the operator during the time that the side brooms are being raised to the UP non-working position.• Its indicator will be OFF when the scrub system has been turned OFF brooms raised into there stored position.• This indicator will fl ash blue when the operator has entered the brush height adjustment mode.Scrub Speed Indicator (M):• This indicator will be blue when the maximum 100% transport speed is enabled.• This indicator will be OFF when the reduced scrub speed is enabled.Traction Control Indicator (B):• This indicator will be blue when the traction control mode is enabled.• This indicator will be OFF when the traction control mode is disabled.KNOW YOUR MACHINE