SERVICE MANUALSOLUTION SUPPLY SYSTEM14 909 6424 000(1)2005-11SOLUTION SUPPLY SYSTEMSOLUTION/WASHING WATER SYSTEM AND TANK CLEANING1. Drive the machine to the appointed disposal area.2. Turn the ignition key (12) to "0" position.3. Empty the solution/washing water through with the tap (36).4. Activate the machine (as described in the User Manual) until the solution/washing water in the machine hasrun out.5. Lift the cover (56) and insert the supporto rod (57).6. Wash and clean the cover (56) and the tank with clean water through the opening (51).7. Drain the water in the tank through the tap (36).8. Activate the machine (as described in the User Manual) until the solution/washing water has run out.9. Remove the supporto rod (57) and close the cover (56).10. Carry out the detergent/washing water filter cleaning (see the following procedure).SOLUTION/WASHING WATER FILTER CLEANING1. Drive the machine on a level ground.2. Turn the ignition key (12) to "0" position.3. Operating under the machine, behind the rear right wheel, close the solution/washing water tap (A). The tap(A) is closed when it is located at position (B) as to the pipeline; it is open when it is located at position (C).4. Operating under the machine, in front of the rear right wheel, remove the transparent cover (D) and the filterstrainer (E); clean and install them again on the related support (F).5. Reopen the tap (A).S301320NOTEThe filter strainer (E) must be correctly positioned on the support (F) housing (G).
