Nilfisk-Advance CR 1500 Instructions For Use Manual

OPERATIONS OF CONTROLS AND GAUGESACCELERATOR & DIRECTIONAL CONTROL PEDALSee Figure 2. The Accelerator and Directional Control Pedal (Q) is located on the floor of the driver compartment, to the right of the brake pedal.The accelerator and directional control pedal controls machine direction and travel speed.1. Put foot pressure on the upper portion of the pedal (b). The machine will move forward.2. Increase the foot pressure on the upper portion of the pedal to increase the forward speed.3. Put foot pressure on the lower portion of the pedal (c). The machine will move in reverse.4. Increase the foot pressure on the lower portion of the pedal to increase the reverse speed.5. To stop the machine, put light foot pressure on the opposite end of the accelerator and directional control pedal. If the machine is movingforward put light foot pressure on the lower portion of the pedal. If the machine is moving in reverse put light foot pressure on the upperportion of the pedal.BACKUP ALARM SWITCHSee Figure 2. The Backup Alarm Switch (P) is located under the lower section of the accelerator and directional control pedal and operates thebackup alarm. The alarm makes a loud audible noise when the machine is being driven in reverse.SEAT ADJUSTMENTSee Figure 2. The Seat Adjustment Lever (R) is located on the right of the seat. This lever allows the seat to be adjusted forward or back when thelever is moved.bcFIGURE 10ENGLISH / A-15FORM NO. - 56041719 - CR 1500 - A-15