Nilfisk-Advance CR 1500 Instructions For Use Manual

OPERATIONS OF CONTROLS AND GAUGES4-WAY TURN SIGNAL (OPTION)The Turn Signal Option (U) is located on the steering column and works as automotive turn signals work, forward on the lever for right and back onthe lever for left. The 4-way flasher will activate when the turn signal lever is pulled out.GLOW PLUG SWITCH (DIESEL)Under no circumstances should any other unauthorized starting aids be used at the same time as Glow Plugs. The Glow Plug Switch (L) is locatedto the right of the steering column on the front face of the instrument console. Use the following procedure to operate:1. Before operating the starter motor, press the “GLOW PLUG” button for 20 to 30 seconds.2. With the “GLOW PLUG” button still depressed, engage the starter motor until the engine starts.3. Continue to press the “GLOW PLUG” button for a few seconds after the engine has started until even running has been obtained.4. If the engine does not start, disengage the starter motor, but keep the “GLOW PLUG” button depressed for an additional 10 to 15 seconds.Keep the Glow Plugs energized while starting the engine and for a few seconds after the engine has been running smoothly.HORN PUSH BUTTONThe Horn Button (N) is located to the right of the steering column on the front face of instrument console. The horn button is always active. Pushthe horn button to sound the horn.SIDE BROOM LIFTThe Side Broom Lift Lever (M) is located to the right of the instrument console. The handle pulled back and turned to the right will raise the sidebroom and lock it into position.FIGURE 3ENGLISH / A-9FORM NO. - 56041719 - CR 1500 - A-9