Nilfisk-Advance Captor 4300 Mechanical Repair Service Manual

Also see for Captor 4300: Instructions for use Quick start manual Quick start troubleshooting manual

Nilfisk-Advance Captor 4300 Mechanical Repair Service Manual Manual pdf 38 page image

36 - FORM NO. 56043094 / Captor™ 4300, 4800, 5400 / CR 1100, 1200, 1400HOPPER SYSTEM FIGURE 2DUMP DOOR CYLINDER REMOVALTo access:1 Raise Hopper Cover and engage hopper cover prop rod.2 See Figure 2. Raise and support Shaker Assembly (H).3 Remove filter assembly.4 Remove (11) Bolts (I) and remove Access Panel (J).To remove cylinder:1 Remove the two hoses from Door Cylinder (K). Note: Mark hose locations to insure correct connections when reassembling.CAUTION!There may be oil in hoses and cylinder, be prepared to plug hoses and cap cylinder connections.2 Remove lower and upper cotter pins and Cylinder Pins (L).3 Remove cylinder.To reassemble:1 Mount cylinder end to upper mounting bracket using pin and cotter pin.2 Pull cylinder rod out until clevis meets with dump door arm.3 Mount cylinder rod end to dump door arm using pin and cotter pin.4 Reconnect the two hoses in correct position.5 Check for proper operation and leaks.6 Reinstall access cover and filter assembly.7 Close Hopper Cover.