11Original InstructionsENDANOSVFIDEFRNLITESPTELTRCSHUPLHRSLSKLVLTETRUZH3 Before you start using your high pressure washerSee the pictorial quick reference guide – unpacking.Illustration shows the operation elements and how to prepare your machine for use.Operation elements1. Start/stop switch2. Water inlet with fi lter3. High pressure connection (models without hose reel)4. High pressure hose5. Electric cable6. Click&Clean spray lance7. Spray handle with lock (7a)8. Click&Clean Tornado PR nozzle9. Click&Clean Powerspeed nozzle10. Foam sprayer11. Nozzle cleaning tool12. Hose reel (not standard)13. Model tag14. Trolley handle (telescopic handle)15. Hose hook16. Hexagon key for handle and bracket mounting17. Button for telescopic handle18. Turnable cable hook19. Quick coupling3.1 Mounting of trolley handle, hose hook and hose reelMounting of trolley handle and hose hook (standard models)A1 Push down the trolley handle (14) over the two metal tubes. Make sure that the handleis mounted as illustrated. Mount screws with nuts (make sure that the screws go throughhandle as well as tube).A2 Mount the hose hook (15) on the handle (2 screws).Mounting of hose reel handle (models with hose reel)A3 Click the hose reel handle on to the trolley handle (no screws).3.2 Mounting of quick couplingA4 When mounting the quick coupling for the fi rst time, check that the factory fi tted fi lter ispositioned in the water inlet pipe.A5 Screw the quick coupling tight on to the water inlet (2).IMPORTANT!The inlet fi lter must always be fi tted in the water inlet pipe to fi lter out sand, limestone and otherimpurities as these will damage the pump valves. The fi lter is factory fi tted.If the fi lter is removed this will invalidate the guarantee.3.3 Telescopic handleA6 The machine features a telescopic handle. To raise or lower the handle, press the button(17) and move the handle upwards or downwards. When a click is heard, the handle is inright position.A