Nilfisk-Advance E 130.3 User Manual

Also see for E 130.3: Instructions for use

Contents

Nilfisk-Advance E 130.3 User Manual Manual pdf 15 page image

15Original InstructionsENDANOSVFIDEFRNLITESPTELTRCSHUPLHRSLSKLVLTETRUZH5.2 Typical fields of applicationBelow you will find a description of a lot of cleaning tasks which can be solved by a pressure washer fromNilfisk in association with accessories and detergents.Task Accessories ‘Click& Clean’Cleaning methodCar Car nozzle,auto brush,underchassisnozzle,Foam sprayer,Car Combi Cleaner1. Apply Car Combi Cleaner with the foam sprayer. Alwaysstart from the bottom and work upwards. Let Car CombiCleaner act for at least 5 min.2. Wash the car with the car nozzle, which has been optimized forquick and gentle cleaning of enamelled surfaces (the jet is widerand not so sharp). Start at the front of the car and work back-wards to avoid water from penetrating by the door mouldings.3. Use the brush for removal of traffic film which is not removed by thenozzle. If the car is very dirty, apply Car Combi Cleaner again.4. Attach the undercarriage nozzle and clean undercarriage andwheel arches.5. Remove water from the surface of the car with the scraperon the car brush. Make sure that all grains of sand etc. havebeen removed before using the scraper. Wipe with a wash lea-ther where the scraper cannot reach.Rims, alumi-niumRim brush,auto nozzle,atomizer,Alu CleanerApply Alu Cleaner with an automizer. Let it act for approx.5 min. and wash with the rim brush. For steel rims, use Car Com-bi Cleaner. Use the foam sprayer and wash with rim brush.Be careful! The high pressure jet may damage the tyres.Flagstones,concretefloors andother hardsurfacesPowerspeed®nozzle,Stone & WoodCleaner,Patio CleanerWash towards outlets or the like. On surfaces with foulings youmay start by applying Stone & Wood Cleaner withthe foam sprayer. Wash before the soap dries. Anothermore effective and quicker method is to use the PatioCleaner. Thus you will also avoid splashes.Garden furni-ture, woodWood CleanerGarden brushApply Wood Cleaner and wash before the soap dries.NOTE: Use the garden brush to clean off the dirt.Brickwork,Wood workPowerspeed®nozzle,Stone & WoodCleaner,Patio CleanerSame method as for fl agstones, but be careful - bad joints andwood may be damaged by high pressure. You may choose onlyto use the Tornado ® nozzle. Adjust the distance (pressure) tothe quality of the joints and the wood. Patio Cleaner can also beused on vertical surfaces.Gutter Underchassis spraylanceWash the gutter with the nozzle. Always wash towardsdownpipes. Beware not to spray under the roofi ng.Cleaning ofdrain pipes,outlets, downpipes etc.Tube cleaner Push the tube cleaner approx. ½ m (to mark) into a tube or drainand activate the trigger of the spray handle. The nozzle openingturning backwards will pull the cleaner through the tube. Thenozzle will break down the „plug“ and flush the dirt backwards.Rust, paint Water/sandblastingequipmentMount the water/sand blasting equipment and rust and paintis efficiently and quickly removed. Beware not to damage thesurface to be sandblasted.Greenhouse Tornado® PR nozzlebrush, Stone &Wood CleanerWash with high pressure and maybe a brush. You may use Stone& Wood Cleaner to remove moss and algae.Garden tools,lawn moverTornado® PRnozzle, Power-speed® nozzle,multiangle adaptor,Metal CleanerRinse the worst dirt off with the nozzle. Apply Metal Cleaner withthe foam sprayer and let it act for approx. 5 min. Wash with thenozzle. You may use the multiangle adaptor for hard to get atareas to avoid splashing.