Nilfisk-Advance EcoFlex BR 1100 S Service Manual

Also see for EcoFlex BR 1100 SC: Instructions for use Instructions for use - original instructions Instructions for use Service manual

Contents

Control System 37Service Manual – Condor™ EcoFlex™, BR 1100/1300 EcoFlex ™2 Press and hold the side broom on/down and scrub off switches3 While holding the switches, turn the key switch on.4 Continue to hold the switches until the side broom on/down indicator, scrub off indicator and both scrubon indicators turn on5 Release the switches The indicators will stay on and the display will now show the side broom actuatordown run time in seconds6. • Press the scrub on switch to increase the side broom actuator run time and lower the position of sidebrooms• Press the side broom on/down switch to decrease the side broom actuator run time and raise theposition of side broomsNote that the side broom actuator run times range from 1 0 to 3 0 seconds7 Press the scrub off switch to save the side broom height The actuator will raise the brooms to their upposition and the display will show a key switch icon.8. Turn the key switch off. The machine is now reprogrammed to work with the new side broom heightsettingDisplay Mode Selection1 Turn the key switch off.2 Press and hold the detergent switch and EcoFlex™ button3 While holding the detergent switch and EcoFlex™ button, turn the key switch on.4 Continue to hold the button and switch for two seconds until the EcoFlex™ and detergent systemindicators turn on5 Release the button and switch The EcoFlex™ indicator will blink and the display will show DISPLAYMODE6 Press the EcoFlex™ button to toggle between 1. US DISPLAY and 2. GLOBAL DISPLAY7 Press the scrub off switch to save the new setting and display the key switch icon.8 Turn the key switch off. The new setting will be saved until changed again.Service Test ModeThe purpose of the service test mode is to assist the service technician with numerous quick shortcuttroubleshooting procedures The service test mode allows you to control individual system componentsindependent of the normal machine operator inputsTo Enter the Service Test Mode1 Turn the key switch off.2 Press and hold the scrub speed and traction control switches3 While holding the scrub speed and traction control switches, turn the key switch on.